Can You Pigeon Proof Solar Panels on a Tile Roof?
Updated: 5 days ago
Yes. Solar panels can be pigeon proofed on tile roofs, and we do this regularly in Arizona.
The main challenge is that tile roofs are not flat. The bird mesh has to follow the shape of the tiles closely enough that pigeons cannot find an opening underneath it.

Why Are Tile Roofs More Difficult to Pigeon Proof?
On a flat roof surface, the bottom of the mesh can follow a relatively straight line.
Tile roofs have high and low points. Depending on the tile, those gaps can change every few inches.
That means an installer cannot simply run a straight piece of mesh around the panels and expect it to work.
The mesh needs to be carefully cut and shaped around the roof.
Do You Attach the Mesh to the Roof Tiles?
The solar panel side of the mesh can be attached using solar specific clips.
Cheetah uses a non invasive attachment method that does not require drilling into the solar panel frames.
The goal is to create a secure barrier between the solar array and roof without unnecessarily modifying the solar panels.
Learn more about our solar panel bird mesh installation.
Are S Tile Roofs Harder?
They can require more fitting because the roof surface has deeper curves.
One common approach is using small precut pieces of mesh designed around the individual tile shapes.
Cheetah generally prefers using continuous roll mesh that is cut and fitted on the roof instead.
With many separate pieces, each section creates another place where a failed or loose attachment could create an opening.
A properly fitted continuous section gives the installation more redundancy while still following the shape of the roof.
Can Pigeons Get Through the Gaps Between the Tiles and Mesh?
They can if the mesh is installed poorly.
The most important areas to inspect are often:
Deep sections between tiles
Corners of the solar array
Changes in panel height
Roof transitions
Areas where the panels sit higher above the roof
Pigeons only need one usable opening to get underneath.
This is why installation quality matters just as much as the type of mesh being used.
What if Pigeons Are Already Nesting Under the Panels?
The area should be inspected and accessible nesting material should be removed before it is sealed.
On tile roofs, nests can sit deeper underneath the array and may not be visible from the ground.
Depending on the project, Cheetah can provide bird nest removal from underneath solar panels and cleanup before the exclusion work is completed.
Can the Installer Break Roof Tiles?
Tile roofs require careful foot placement because tiles can crack when stepped on incorrectly.
This is one reason homeowners should ask whether the pigeon control company regularly works on tile roofs and carries proper insurance for rooftop work.
The cheapest quote is not very useful if the installer is inexperienced with the roof they are working on.
The Bottom Line
Yes, solar panels on tile roofs can be pigeon proofed effectively.
The key is properly fitting the mesh to the contours of the roof instead of leaving straight gaps underneath it.
For Arizona tile roofs, Cheetah generally uses black PVC coated galvanized steel mesh, metal solar panel clips, and continuous roll installation.

Comments